Network

Network Boxes and Accessories

The Tamlite lighting NETWORK DB range of connection boxes allows for small, medium or large, commercial lighting installations with lighting controls to be installed quickly and efficiently.

NETWORK DB provides an efficient and cost-effective way to interconnect presence detectors and luminaires using industry-standard connectors.

  • Up to 10 or 12 luminaires (or luminaire chains up to 6A max) can be connected
  • Up to 5 detectors can be connected
  • Up to 5 seperate, switch inputs can be connected

Luminaires may be switched via conventional on/off switches. One switch can switch up to 12 luminaires or two switches can switch up to 6 luminaires each. Emergency lights may be tested by interrupting the maintained live supply using a suitable key-switch

Key Features

  • Flexible
    Can be used on a wide range of installations
     
  • Labour saving
    Pre-wired luminaires saves install time on-site
    No termination on detectors
     
  • Simple programming NETDB12
    Can be commissioned with simple
    drop down programme
     
  • Interfacing
    Low-level UBT interfacing
     
  • Applications
    Schools
    Hospitals
    Offices
    Hotels
    Retail
Click to view NETDB10
Click to view NETDB12
Click to view NETWORK WIRING

NETDB10

Description

NETWORK DB10 provides an efficient and cost effective way to interconnect presence detectors and luminaires using industry-standard connectors. One or two detectors can be connected to up to 10 luminaires depending on the configuration required. One detector can control up to 10 luminaires or two detectors can control up to 5 luminaires each. The 7-way connectors facilitate the option for the addition of manual switching. A range of detectors incorporating the facility for One-Switch operation is available complete with 7-way connectors for 'plug and play' connection to the NETWORK DB box.

Specification

  • Operating Voltage: 230V 50Hz (Uk & Europe)
    Product Rating/Recommended Circuit Protection: 16 Amps
  • Maximum load per outlet: 6 Amps
  • Maximum total load: 16 Amps
  • Supply terminal capacity: 6.0mm (2 x 2.5mm)
  • Dimming terminal capacity: 4.0mm
  • Case material: Polycarbonate
  • Case finish: Lightly textured light grey

DB Codes

Order Code
Specification
NETDB10
10 way luminaire distribution box
V102/NET103
Photocell PIR detector with 3.0m lead
for use with NETDB10

NETDB12

Description

NETWORK DB12 has 6 output channels providing control through various protocols (DSI/DALI and Analogue dimming and conventional switching), with the capability of connecting motion detectors and volt-free switch inputs. Luminaires use industry-standard connectors. Simple programming changes are made via an infrared programmer. By connecting a Control and Communications interface, each NETDB12 box can be monitored over an internet or ethernet connection and interact via BACnet protocol to other systems (BMS, HVAC, Security).

Specification

  • Operating Voltage: 230V 50Hz (Uk & Europe)
    Product Rating/Recommended Circuit Protection: 16 Amps
  • Maximum load per outlet: 6 Amps
  • Maximum total load: 16 Amps
  • Supply terminal capacity: 6.0mm (2 x 2.5mm)
  • Dimming terminal capacity: 4.0mm
  • Case material: Polycarbonate
  • Case finish: Lightly textured light grey

DB Codes

Order Code
Specification
NETDB10
10 way luminaire distribution box
V102/NET103
Photocell PIR detector with 3.0m lead
for use with NETDB10

Network Pre-wired Options

The Tamlite Lighting 'NETWORK' options allow contractors to make use of today's technology and benefit from quicker installation times and simplified wiring systems. There are 2 main advantages.

  • Products can be supplied pre-wired with flex and plug to connect to many proprietary wiring systems. This means installation times are drastically reduced as the product now only requires mechanical installation with a simple click connection to power
  • Maintenance of the lighting system becomes easier and quicker as any removal of the luminaires can easily be done by unplugging an item and taking it away

4 Pole T Piece Connector Option

  • 4 Pin male/female 'T' connector
  • Allows 'daisy chain' connection of circuit
  • Full range of connecting leads available
  • Add suffix '/PWT' to luminaire order code for supply with 4 pole 'T' piece connector

Accessories

  • PWT20
    Supplied with 4 pole "T" piece including a 2.0m lead
     
  • PWT30
    Supplied with 4 pole "T" piece including a 3.0m lead
     
  • PWT40
    Supplied with 4 pole "T" piece including a 4.0m lead
     
  • PWT50
    Supplied with 4 pole "T" piece including a 5.0m lead